Features
1. Non-adhesion going-through rotor with new material chamber, completely eliminate bonding and blocking during operation so as to reduce clearance and maintenance period.
2. Thin flow conveying method with vortex flow, so the spraying flow is even, continuous and steady, to improve the shotcrete quality.
3.Four-point clamping device make it easy to adjust the press between sealing plate and rotor disk so as to no air and dusk leak and prolong consumption parts life.
4.Partifularly used for dry,damp mix and steel(polymer)fibre reinforced shotcrete.
Technical data
|
Diesel engine drive gunite machine |
|
| Output Capacity | 6-9m3 /h |
| Max. Horizontal Conveying Distance | 200m |
| Suitable Mix Ratio(Cement/Sand) | ≤1:4~5 |
| Max. Aggregate Size | Dia.20 mm |
| Conveying Hose Inner Diameterr | Dia.64 mm |
| Conveying Pressure | 0.2-0.4MPa(29-58PSI) |
| Air Consumption | 10~12m3/min(357-430CFM) |
| Material Charging Height | 1.1m |
| Rotor Speed | 7.5-11r/min |
| Diesel Engine | 20hp,2200rpm, Radiator Cooling |
| Diesel Engine Starting | Electric start |
| Clutch Type in Diesel Engine | Automatic Clutch |
| Air Vibrator | OR100,Oli |
| Overall Dimension(length×width×height) | 2.66×1.11×1.50m |
| Net Weight | 950kg |
| Gaode Equipment also could design the dry mix guntie machine with skid or rail-wheels. | |
This 9m3/h dry-mix cement gunite machine can be also made as diesel gunite machine and pneumatic one.
GZ-9 is available in following versions:
Basic: electric gunite machine can be combined with tyre chassis
|
Electric driven gunite machine |
|
| Output Capacity | 9m3 /h |
| Max. Horizontal Conveying Distance | 200m |
| Suitable Mix Ratio(Cement/Sand) | ≤1:4~5 |
| Max. Aggregate Size | Dia.20 mm |
| Conveying Hose Inner Diameter | Dia.64 mm |
| Conveying Pressure | 0.2-0.4MPa(29-58PSI) |
| Air Consumption | 10~12m3/min(357-430CFM) |
| Air Motor Air Pressuret | 0.5MPa(71PSI) |
| Material Charging Height | 1.1m |
| Rotor Speed | 11r/min |
| Electric Motor | 7.5kW,Y132M-4,IP55 |
| Vibrator Electric Motor | 0.15kW,XVM-A1.5-2 |
| Available Voltage | 220V,380V, 440V,660V 50Hz/60Hz |
| Overall Dimension(length×width×height) | 1.65×0.9×1.25m |
| Net Weight | 900kg |
|
Air motor drive gunite machine |
|
| Output Capacity | 5-9m3 /h |
| Max. Horizontal Conveying Distance | 200m |
| Suitable Mix Ratio(Cement/Sand) | ≤1:4~5 |
| Max. Aggregate Size | Dia.20 mm |
| Conveying Hose Inner Diameter | Dia.64 mm |
| Conveying Pressure | 0.2-0.4MPa(29-58PSI) |
| Air Consumption for conveying material | 10~12m3/min(357-430CFM) |
| Material Charging Height | 1.1m |
| Rotor Speed | 6-11r/min |
| Air Motorr | TMH8A |
| Air pressure for air motor | 0.5Mpa |
| Air consumption for air motor | 10 m3 /min/357CFM |
| Vibrator | OR100,oil |
| Overall Dimension(length×width×height) | 1.65×0.9×1.25m |
| Net Weight | 900kg |
